Charging base: For SP4 and AdverTeaser
LRS Charging Base for SP4 Service Pagers and Paddle Pager for use with these pagers only.
Note that this charger is NOT suitable for the new LRS Vibe+ (AP2) alphanumeric rechargeable pager or the new SP6 Service Pagers.
You will need the pager-charger-11-HC charger for the AP2 pager or the SP6 Service Pager.
SP4 and Adverteaser are similar cases fitted to each pager, but in the case of the Adverteaser there is extra space for promotion. However the Charger 9 is fully compatible with both units. Note that although the base plate is shown in this image, it is NOT supplied with the charger 9 as customers typically do not require it. The charger 9 has 'keyhole' slots if it is to be mounted on a wall for example to save desktop space.
The unit can be bought as a single unit (supports 5 pagers), a dual unit (supports 10 pagers), a three slot unit (supports 15 pagers), a four slot unit (supports up to 20 pagers). While it is possible to add more charger 9's the power supply will not support more than 20 pagers so it is not recommended.
And remember for each two charger 9's you buy you need at least 1 link cable.
Our customer services can help if you can't understand what to order.
It's simple to tell which charger you have:
Note that the pager charger 9 has RED lights when the unit is charging pagers.
The pager charger 11 HC has blue lights when charging the AP2 pager.
AC/DC Charging Base: PRODUCT FEATURES
- A power connector on each side allowing cascading of chargers
- Locking Tabs keep the chargers together
- Can be wall mounted if desired
AC/DC Charging Base: BENEFITS
- Keeps Pagers in order on charge
This item can be used with an AC/AC or AC/DC power supply.
CUSTOMERS ALSO BOUGHT
|
> Waiter Staff Call Paging |
Compatible Products
SP4 Pagers are compatible
